Featured Pick-and-Place Machines
Compare these SIPLACE models, then ask about the configuration and condition currently available. A model listing does not establish the specification of an individual used machine.
-
ASM SIPLACE TX2i High-Output SMT Placement Machine
ASM SIPLACE TX2i dual-gantry SMT mounter with benchmark output up to 96,000 CPH and CP20, CPP or TWIN placement-head options.
-
Used ASM SIPLACE CA2 Hybrid SMT & Die Attach Machine
SiP production with SMT and die attach: Used ASM SIPLACE CA 2 hybrid platform. CP20 head, 76,000 cph SMT, 51,000 cph flip-chip, 10μm @3σ. 50-wafer, 13-second swap. What's your die and SMD mix? We'll tailor the ...
-
ASM SIPLACE SX2 High-Mix SMT Placement Machine
ASM SIPLACE SX2 for high-mix SMT assembly. Explore modular placement equipment for varied PCB designs and changing component requirements.
-
ASM SIPLACE TX2 Dual-Gantry SMT Placement Machine
ASM SIPLACE TX2 dual-gantry SMT machine for space-efficient, high-speed electronics assembly. Review configuration options for your production line.
Featured SMT Spare Parts
Find selected feeders, placement heads, nozzles and service parts. Match the full part number and revision before confirming a replacement.
-
ASM SIPLACE 00345186-01 KWVE 25 H Guide Trolley
ASM SIPLACE 00345186-01 KWVE 25 H guide trolley — made in Germany, 25 mm rail width, 23,400 N dynamic load rating, roughly 1 kg. Fits SIPLACE placement machines as a direct replacement. Check for 00345186S01 as an altern...
-
ASM SIPLACE 4107/6107 Ceramic Nozzle | P/N 03102344
ASM SIPLACE 4107/6107 ceramic nozzle, P/N 03102344, with a 1.4 × 0.66 mm pickup tip and 10.4 mm length for compatible C&P20 head configurations.
-
ASM SIPLACE 03126608 SpeedStar CP20P2 Placement Head
ASM SIPLACE SpeedStar CP20P2 placement head, P/N 03126608, for high-speed SMD placement. Verify head generation, machine interface and camera configuration before replacement.
-
ASM SIPLACE 88mm X SmartFeeder with Splice Sensor | P/N 00141398
P/N 00141398 ASM SIPLACE 88mm X SmartFeeder integrated with splice sensing. Suitable for SIPLACE X mounters. Every unit tested for sensor response and tape transport stability, minimising unexpected SMT line stops.
ASM SIPLACE Supply from Shenzhen
GEEKVALUE works with manufacturers, maintenance teams and equipment traders sourcing ASM SIPLACE machines and replacement parts. Our range includes placement machines, feeders, heads, nozzles and components for established production lines.
For an equipment purchase, the discussion starts with the required model and production task. For a replacement part, it starts with the complete label and the machine where it will be installed. Those details determine what we need to check before quoting.
- Machine sourcing: Series, installed heads, conveyor and included accessories.
- Replacement parts: Complete part numbers, revisions, interfaces and supply condition.
- Technical enquiries: Fault information and photos for discussing repair or replacement.
- Company details: Meet GEEKVALUE and contact our team.
Find Machines and Parts by Requirement
Choose a machine series, identify a replacement part, or discuss a technical issue with the team.
ASM SIPLACE Machines by Series
Browse TX, SX, X S and legacy SIPLACE platforms. Compare models first, then confirm the heads, conveyor options, software information and condition of the machine offered.
Learn More +
ASM Spare Parts for Faster Maintenance and Stable Production
Source ASM SIPLACE feeders, placement heads, nozzles, motors, boards, sensors, cables and legacy replacement parts. Parts can be matched by machine model, original part number, installed position and clear photos to reduce incorrect orders and shorten maintenance response time.
Explore Spare Parts +-
SMT Head
-
SMT Feeder
-
SMT Nozzle
-
SMT Trolley
-
SMT Motor
-
More SMT parts
Technical Support Built Around the Actual Machine Configuration
Our support covers machine-condition review, feeder calibration, placement-head service, fault analysis, part identification and configuration checks. Labels, alarm information, photos, videos and installed positions are reviewed together to help maintenance teams identify practical next steps.
Talk to a Technical Specialist +-
Machine Inspection
-
Feeder Calibration
-
Placement Head Service
-
Fault Diagnosis
-
Parts Identification
-
Remote Support
Support for ASM Line Expansion, Changeover and Long-Term Operation
From adding a compatible machine to an existing SIPLACE line to planning feeder packages, spare-part inventories and maintenance priorities, we help factories keep equipment, components and production requirements aligned throughout the operating lifecycle.
Discuss Your Line Requirement +
Serving SMT Manufacturers Worldwide
Tell us the destination country and required delivery date. Packing, transport and available service arrangements are confirmed for the specific machine or parts order.
ASM SIPLACE Selection and Maintenance Guides
Practical reading on machine capacity, part identification and maintenance decisions.
-
How to Match SIPLACE Belts Cables and Mechanical Replacement PartsIdentify SIPLACE belts, cables, guides, and sliding blocks through nominal dimensions, mating geometry, wiring, and the demands of their installed route.
-
SIPLACE Camera and Sensor Identification Before ReplacementIdentify a SIPLACE camera or sensor by its role, complete part number, revision, installation position, and connection details. Camera checks also need the optical configuration and supported image interface. Sensor chec...
-
ASM SIPLACE Motor and Control Board Replacement ChecksA replacement SIPLACE motor or control board needs more than a matching housing or connector. Verify the complete assembly number, revision, electrical requirements, feedback or communication interface, and machine confi...
-
Buying SIPLACE Placement Head Parts Without Confusing the AssemblyTo order a SIPLACE placement head part, identify the exact head variant and then locate the required item within its assembly documentation. Confirm whether the quotation covers a complete head, a subassembly, or an indi...
-
SIPLACE Feeder and Nozzle Compatibility Checks That Prevent Wrong OrdersSIPLACE feeder compatibility depends on the feeder family, machine interface, tape handling requirements, and supported configuration. Nozzle compatibility depends on the placement head, nozzle holder, component contact ...
-
How to Identify ASM SIPLACE Spare Parts Before OrderingTo identify an ASM SIPLACE spare part, record the complete part number, including any suffix, and match it to the machine configuration and installation position. Compare the label, interfaces, mounting dimensions, and r...
Frequently Asked Questions About ASM SMT Equipment
Get practical answers about ASM SIPLACE machine selection, spare-parts matching, used equipment, feeder compatibility, technical support, line expansion and worldwide supply.
What ASM SIPLACE machines and spare parts do you supply?
−We supply ASM SIPLACE SMT placement machines, feeders, placement heads, nozzles, motors, boards, sensors, cables and related production accessories. Machine support covers current and legacy platforms, including SIPLACE TX, SX, X S, X, E, D and HS Series, subject to model and inventory availability.
Do you supply new, used and refurbished ASM SMT machines?
+New, used and refurbished ASM SIPLACE machines may be available according to the requested model and current inventory. Before quotation, we confirm the machine model, manufacturing year, installed heads, conveyor configuration, software information, included accessories and available inspection details.
How can I identify the correct ASM SIPLACE spare part?
+The most reliable method is to provide the original part number, machine model, installed position and clear photos of the existing component. Photos of the label, connector, cable interface and surrounding installation area help distinguish parts that look similar but use different revisions or configurations.
Are ASM feeders, placement heads and nozzles compatible across different machines?
+Compatibility depends on the machine platform, feeder generation, placement-head type, nozzle interface, software version and installed configuration. A part should not be selected by appearance alone. We review the complete machine model and original part information before recommending a compatible replacement.
How do you check a used ASM SIPLACE machine before shipment?
+Available checks may include the machine label, installed placement heads, conveyor arrangement, feeder tables, software information, machine appearance and operating condition. The exact inspection and testing scope is confirmed for each machine before the order, together with the included equipment and accessories.
Can you support older Siemens SIPLACE D, E, X and HS machines?
+Yes. We support many established Siemens and ASM SIPLACE platforms with used machines, feeders, placement-head parts, nozzles, motors, boards, cameras, sensors and cables. Availability varies by part number, so legacy components should be checked using the original label and installed-machine information.
Can you help expand or replace equipment in an existing ASM SMT line?
+Yes. We can help match an additional or replacement SIPLACE machine to an existing line by reviewing the current machine models, placement heads, conveyor setup, feeder inventory, PCB requirements and production targets. Compatible feeder packages and priority spare parts can also be included in the project.
What information is required for an ASM machine or spare-parts quotation?
+For machines, provide the required model, configuration, quantity, preferred condition, production application and destination country. For spare parts, provide the part number, machine model, quantity and clear photos. Delivery time and shipping options are then confirmed according to stock status, inspection requirements and destination.
Need Help With an ASM Machine or Spare Part?
Send the machine model, part number, component photos or production requirements. Our ASM SMT specialists can help verify compatibility, available stock and suitable supply options.