ASM SIPLACE 03126608 is the SpeedStar CP20P2, also identified by ASM as the C&P20 P2 placement head. For replacement work, CP20P2 is the critical identity: this is a distinct head generation and should not be reduced to the generic CP20 family name.
The neighboring P/N 03091157 is separately documented as a CP20P placement head, while 03126608-01 is listed as CP20P2. These are separate service references, so procurement should match the installed head generation, complete label and machine configuration rather than assuming CP20P and CP20P2 are interchangeable.
Camera scope is the second major purchasing point. A documented 03126608-01 service-supply configuration is offered without camera, with camera available separately on request. A complete CP20P2 head requirement should therefore specify whether the quotation must include the camera instead of assuming it is part of every 03126608 assembly.
03126608 CP20P2 Specifications
| Part Number | 03126608 |
| Documented Revision | 03126608-01 |
| Head Type | SpeedStar CP20P2 / C&P20 P2 placement head |
| Head Generation | CP20P2 |
| Documented Supply Scope | 03126608-01 service head offered without camera; camera available separately |
| Related Head | 03091157 — CP20P placement head |
| Key Matching Point | Confirm CP20P2 generation, complete suffix, machine configuration and required camera scope |
The CP20P2 should also be diagnosed as a complete head only after lower service levels have been considered. ASM training for the C&P20 P2 covers troubleshooting, parts replacement, adjustment, calibration and the head vacuum system, confirming that service work can take place below complete-head level.
When the symptom is limited to one head function, first narrow the fault through the relevant vacuum, sensor, segment, interface or vision path. A localized head-side problem does not automatically justify replacement of the complete 03126608 assembly.
This repair boundary is particularly important for a high-value SpeedStar head. If the failed area can be isolated to a serviceable component or subassembly, the repair can remain below complete-head level. Complete-head replacement or exchange-repair becomes more appropriate when the CP20P2 assembly itself has been confirmed as the failed service level.
For the earlier head generation, see the ASM SIPLACE 03091157 CP20P placement head. Other complete heads, sensors, vacuum parts and head-service components are available under ASM SIPLACE SMT head parts.
For a 03126608 requirement, send the complete head label, machine model, gantry configuration, photos, camera requirement and fault information. Remote technical troubleshooting can help determine whether the repair should remain at subassembly level or move to complete-head replacement. For suitable units, exchange-repair service can be discussed, and a formal specification confirmation sheet can support internal purchasing approval.