P/N 03102344-01 is the SIPLACE Type 4107/6107 ceramic placement nozzle from the 4xxx/6xxx nozzle family used with C&P20 P/M2/P2 placement-head configurations. Its documented geometry is 10.4 mm overall length with a 1.4 × 0.66 mm pickup tip, making the pickup-face dimensions an important part of replacement matching.
Choose 03102344 when the installed nozzle or approved head setup specifically calls for the 4107/6107 geometry. The related 03103544 4108/6108 ceramic nozzle belongs to the same family but uses a much smaller 0.47 × 0.30 mm pickup tip and a different 11.0 mm nozzle length. The two should therefore not be selected only because they fit the same nozzle family.
The larger pickup face of the 4107/6107 changes the component contact area and vacuum coverage compared with smaller adjacent nozzles. If the nozzle geometry does not match the existing process, the symptom may appear as unstable pickup, component drop or placement offset rather than an obvious installation error. For a fault isolated to this nozzle position, inspect the ceramic pickup face for contamination or chipping, confirm that the vacuum opening is clear, and check nozzle seating before moving to wider head-side troubleshooting.
The SIPLACE CP20 P2 placement head provides one relevant head-generation reference for this nozzle family. Other SIPLACE nozzle geometries can be compared in the ASM SIPLACE nozzle range.
03102344 4107/6107 Nozzle Specifications
| Part Number | 03102344-01 |
|---|---|
| Nozzle Type | 4107 / 6107 |
| Assembly Level | Complete nozzle |
| Nozzle Material | Ceramic |
| Nozzle Length | 10.4 mm |
| Tip Geometry | 1.4 × 0.66 mm (L × W) |
| Nozzle Family | SIPLACE 4xxx / 6xxx |
| Head Family | SIPLACE C&P20 P/M2/P2 |
For matching, send the complete 03102344 nozzle marking, placement-head identification, clear photos of the pickup face and mounting side, the component being handled, required quantity, and any pickup or placement symptom. If the label is difficult to read, the 10.4 mm length and 1.4 × 0.66 mm pickup geometry provide useful secondary identification points.
Stock is available, and confirmed orders can be arranged for shipment as soon as possible. Before quotation, we can compare the P/N, old nozzle photo, head configuration and application to reduce the risk of selecting another 4xxx/6xxx nozzle with the wrong pickup geometry.
After-sales support and warranty are available, with the exact terms confirmed for the specific order. Send us the nozzle label, old-part photos, head information and quantity for a matching check and quotation.