P/N 00119722 is the SIPLACE X-Series component changeover trolley for X feeder modules, with capacity for up to 40 X-feeder positions. Verified applications include older-series X2, X3, X3 S, X4, X4 S and X4i S machines, making the exact trolley configuration and machine generation important when replacing an existing COT.
Unlike a general feeder storage cart, this trolley forms part of the SIPLACE X-Series feeder positioning and docking system. The table uses guide profiles, centering points and locking elements to position X feeder modules correctly, so selection should be based on the existing P/N, suffix and machine setup rather than appearance alone.
PCB transport height is another important matching point. SIPLACE X component trolleys are configured for different conveyor heights, including 830, 900, 930 and 950 mm machine transport-height settings. A trolley with the wrong height or docking configuration may not align correctly with the machine and can prevent proper table positioning, feeder centering or locking.
The trolley supports X feeder modules used across different tape widths, so feeder population should also be checked when adding another table or replacing an existing unit. X feeder types and widths can be reviewed in the ASM SIPLACE feeder range.
00119722 X-Series Changeover Trolley Specifications
| Base Part Number | 00119722 |
|---|---|
| Known Revisions | -05, -07, -09, -99 |
| Part Type | SIPLACE X-Series Component Changeover Trolley |
| Assembly Level | Complete component trolley / changeover table |
| Verified Machine Models | X2, X3, X3 S, X4, X4 S, X4i S |
| Feeder Capacity | Up to 40 × 8 mm X feeder module locations |
| Table Size | 752 × 592 mm |
| Weight | Approx. 80.4 kg without feeder modules |
| PCB Transport Height | 830 / 900 / 930 / 950 mm configurations |
| Corresponding Trolley Height | Approx. 820 / 890 / 920 / 940 mm |
| Standard Reel Diameter | Up to 432 mm (17 in.) |
| Maximum Reel Diameter | Up to 483 mm (19 in.) |
| Common Cross-Reference | 03020126 — confirm against the existing trolley label and configuration |
For matching, send the complete 00119722 suffix, exact SIPLACE X machine model, PCB transport height, current feeder configuration, required quantity, and clear photos of the trolley label, docking area and full table. Known suffixes should be matched to the existing installation because a functional difference between revisions should not be assumed from the base P/N alone.
Common X-Series trolley configurations are normally kept in stock, and confirmed orders can usually be arranged for shipment within 24–48 hours. Urgent line-repair requirements can be prioritized where applicable. Before quotation, we can cross-check the P/N, machine generation, transport height, feeder capacity and docking configuration against the existing setup.
If the current problem involves difficult docking, feeder positioning or table alignment, send photos or video together with the machine model and symptom. Remote technical support is available to help narrow down whether the issue is related to the trolley, docking interface or another part of the setup before replacement.
A formal specification confirmation sheet and OEM-reference comparison can be provided for internal purchasing records and approval. After-sales support and warranty are available, with the exact terms confirmed for the specific order. Other feeder carts and changeover tables can be compared in the ASM SIPLACE trolley range.