P/N 03101981-01 is the SIPLACE Type 4103/6103 ceramic placement nozzle. Its documented geometry is 10.8 mm overall length with a 0.9 × 0.5 mm pickup tip, and the 4xxx/6xxx nozzle family is used with SIPLACE C&P20 P/M2/P2 placement-head configurations. The 4103/6103 is also referenced for 1005 component handling, giving this nozzle a much more specific application than a generic “precision nozzle.”
Choose 03101981 when the existing nozzle identification or approved setup calls for the 4103/6103 geometry. It should not be confused with the 03102457 4105/6105 ceramic nozzle: the 4103/6103 uses a 0.9 × 0.5 mm pickup tip, while the 4105/6105 uses a considerably smaller 0.4 × 0.2 mm tip. Even within the same ceramic nozzle family, nozzle type and pickup-face geometry remain part of the process setup.
Using a tip geometry that does not match the intended component changes the available pickup contact area and vacuum coverage. On a 1005 application, this may appear as intermittent pickup, component drop or placement offset rather than an obvious nozzle installation problem. If these symptoms are isolated to a position using 4103/6103, inspect the ceramic pickup face for contamination or chipping, confirm that the vacuum opening is clear, and check nozzle seating before moving to a wider placement-head diagnosis.
For C&P20-family context, the SIPLACE CP20 P2 placement head provides one relevant head-generation reference. Other nozzle geometries and component applications can be compared in the ASM SIPLACE nozzle range.
03101981 4103/6103 Nozzle Specifications
| Part Number | 03101981-01 |
|---|---|
| Nozzle Type | 4103 / 6103 |
| Assembly Level | Complete nozzle |
| Nozzle Material | Ceramic |
| Nozzle Length | 10.8 mm |
| Tip Geometry | 0.9 × 0.5 mm (L × W) |
| Head Family | SIPLACE C&P20 P/M2/P2 nozzle family |
| Known Component Application | 1005 chip component |
For matching, send the complete 03101981 nozzle marking, placement-head identification, clear photos of the pickup face and mounting side, the component or package being handled, required quantity, and any pickup or placement symptom. If the marking is unclear, the 10.8 mm nozzle length and 0.9 × 0.5 mm pickup geometry provide useful additional identification points.
We can compare the requested P/N, existing nozzle photo, placement-head information and component application before quotation. For nozzle supply, model accuracy, visible tip condition and the pickup/vacuum path can also be checked against the actual requirement, reducing the risk of selecting another 4xxx/6xxx nozzle only because the mounting family appears similar.