P/N 03057850-03 is the SIPLACE Type 2007 complete ceramic nozzle, with known application on CPP placement-head configurations. For replacement or spare planning, the important starting point is the existing 2007 nozzle identification and CPP head setup rather than the broad description of a general-purpose SMT nozzle.
Choose 03057850 when the installed configuration specifically calls for Type 2007. The CPP platform can use more than one nozzle type, including Type 2034, so sharing the same parent head does not make those nozzles interchangeable. The nozzle type should be matched to the existing production setup before changing from one reference to another.
A wrong nozzle type can change the pickup contact geometry and vacuum condition at that spindle position, which may show up as unstable pickup or inconsistent component handling. If a position using a 2007 nozzle begins to mis-pick, first inspect the ceramic tip for contamination, chipping or other visible damage, then check the nozzle seating and vacuum path before moving to a wider CPP head diagnosis.
The 2007 nozzle is one of several nozzle types used with CPP applications. The related SIPLACE CPP placement head page provides the parent-head context, while other nozzle references can be checked in the ASM SIPLACE nozzle range.
03057850 2007 Ceramic Nozzle Specifications
| Base Part Number | 03057850 |
|---|---|
| Known Revision | 03057850-03 |
| Nozzle Type | 2007 |
| Part Type | Complete placement nozzle |
| Assembly Level | Complete nozzle |
| Nozzle Material | Ceramic |
| Known Application | SIPLACE CPP placement head |
For matching, send the complete 03057850 nozzle marking or suffix, CPP head identification, clear photos of the existing nozzle from the pickup face and mounting side, the component or package being handled, required quantity, and the pickup symptom if the request is related to a production problem.
When several nozzle types are already used on the same CPP head, the head model alone is not enough to select the replacement. We can help compare the part number, existing nozzle and application before quotation; return/exchange support and part-specific warranty terms can then be confirmed for the supplied nozzle.