P/N 03015854 is the SIPLACE Type 1006 ceramic nozzle for the C&P20 A/M nozzle family. Its documented geometry is 10.4 mm overall length with a 0.44 × 0.35 mm pickup tip, so the nozzle type and pickup-face dimensions are the main references when matching an existing production setup.
Choose 03015854 when the installed nozzle identification or approved SIPLACE C&P20 A/M head setup calls for Type 1006. Other 1xxx ceramic nozzles use different pickup geometries even when their overall length is similar. For example, Type 1005 uses a 0.40 × 0.20 mm tip, while Type 1006 uses 0.44 × 0.35 mm, so the family number alone is not enough to select a replacement.
The difference in pickup-face geometry changes how much component surface is covered by the nozzle and how the vacuum is applied during pickup. If pickup becomes inconsistent at a position using Type 1006, first inspect the ceramic tip for contamination or chipping, confirm that the small vacuum opening is clear, and check nozzle seating before moving to wider head-side troubleshooting.
Other C&P20 and SIPLACE nozzle geometries can be compared in the ASM SIPLACE nozzle range.
03015854 1006 Ceramic Nozzle Specifications
| Base Part Number | 03015854 |
|---|---|
| Known Part Number Family | 03015854-XX |
| Nozzle Type | 1006 |
| Assembly Level | Complete nozzle |
| Nozzle Material | Ceramic |
| Nozzle Length | 10.4 mm |
| Tip Geometry | 0.44 × 0.35 mm (L × W) |
| Head Family | SIPLACE C&P20 A/M |
For matching, send the complete 03015854 nozzle marking or suffix, C&P20 A/M head identification, clear photos of the pickup face and mounting side, the component being handled, required quantity, and any pickup or placement symptom. If the marking is difficult to read, the 10.4 mm length and 0.44 × 0.35 mm pickup geometry provide useful secondary reference points.
For Type 1006, the main purchasing risk is selecting another 1xxx ceramic nozzle from the same head family without checking the pickup geometry. We can compare the part number, old nozzle photo, head information and application before quotation, and confirm return/exchange support and part-specific warranty terms against the supplied nozzle.