P/N 185002 is the DEK Camera X-Axis Motor assembly using a BG65X50-CI motor with a 7.66:1 gearbox. Its role is to drive the printer camera along the X direction, so the motor model, gearbox ratio and installation position all need to match the existing vision-motion setup.
This motor should not be selected as a generic DEK actuator. The closely related 185003 assembly uses the same BG65X50-CI and 7.66:1 gearbox format but is assigned to the Camera Y axis, while the DEK 145520 Camera Y-Axis Motor belongs to another camera-motion reference. Confirm the axis and installed motor label before replacement.
If the camera X movement becomes intermittent, cannot complete positioning, or shows abnormal motion, first inspect the X-axis drive belt and pulley path for wear or mechanical resistance. Then check the motor power loom, connectors and cable movement before treating the geared motor itself as the confirmed failure. DEK parts lists identify 188682 as the Camera X drive belt and 191238 as the Camera X motor power loom, so these related parts should be considered during diagnosis.
Known application records include DEK Horizon 03i and other legacy DEK printer configurations using this Camera X assembly. When machine compatibility is unclear, send the printer model and installation photos rather than selecting by the BG65X50-CI motor designation alone. Other DEK motor references can be checked in the SMT Motor range.
DEK 185002 Camera X Motor Specifications
| Part Number | 185002 |
|---|---|
| Common Market Reference | D-185002 |
| Part Type | Camera X-Axis Geared Motor |
| Assembly Level | Complete motor and gearbox assembly |
| Motor Model | BG65X50-CI |
| Gearbox Ratio | 7.66:1 |
| Axis / Function | Vision Camera X-Axis Drive |
| Known Application Example | DEK Horizon 03i camera X-axis system |
| Related Drive Belt | 188682 — Camera X Drive Belt |
| Related Motor Loom | 191238 — Camera X Motor Power Loom |
For matching, send the complete 185002 motor label, DEK printer model, gearbox marking, connector and cable photos, installation-position photo, required quantity, and any camera X-axis alarm or motion symptom. A short video of the camera attempting to move is especially useful when the fault has not yet been isolated.
Common versions are normally kept in stock, and confirmed orders can usually be arranged for shipment within 24–48 hours. Urgent line-repair orders can be prioritized where applicable. Before quotation, we can cross-check the motor P/N, BG65X50-CI reference, 7.66:1 gearbox, axis position and connector arrangement against the existing assembly.
Remote troubleshooting support is available. Send the alarm information, movement video and installation photos, and we can help narrow the likely fault toward the X-axis belt/pulley, cable and power loom, geared motor or control side before replacement.
A formal specification confirmation sheet and OEM-reference comparison can be provided for purchasing records and approval. After-sales support and warranty are available, with the exact terms confirmed for the specific order. Exchange-repair support can also be checked for eligible repairable units.