P/N 0033167 is an ASM SIPLACE X-axis motor unit for HS50, HS60, D1, D2 and D4 placement machines, with known revision 0033167-03. X-axis motors are not interchangeable across SIPLACE machine generations, so always match by the complete part number and exact machine model, not just by axis function.
This distinction matters during purchasing. For example, 00310954 is associated with S15/F3/G2 machines, 00318553 with S20/F4/F5, and 00334153 with S23-S27, F5HM, CS and CF platforms. These are all X-axis motors, but they should not be selected as equivalents simply because the function name is the same.
When maintenance has already isolated the problem to the X-axis motor level, replacing the 00333167 unit provides a targeted repair route for an existing HS- or D-Series machine rather than treating the complete gantry assembly as the replacement item. For factories continuing to operate legacy SIPLACE platforms, the correct X-axis motor can also be a practical maintenance spare for planned or urgent repair.
X-axis alarms do not automatically mean the 00333167 motor has failed. Typical symptoms can include X-axis alarms, homing or reference errors, unstable axis movement, abnormal noise or vibration, and positioning deviation. Before replacing the motor, follow this standard troubleshooting order: first inspect the mechanical drive path for resistance or wear, then check cables, connectors and encoder feedback components, and finally verify the drive and control side.
For machine-reference information, see the SIPLACE HS Series and SIPLACE D Series. If the exact fault point is still unclear, send the motor label, machine model, X-axis installation photos, alarm information and a short movement video for review before ordering.
00333167 X-Axis Motor Specifications
| Part Number | 00333167 |
|---|---|
| Known Reference | 00333167-03 |
| Part Type | X-Axis Motor Unit |
| Verified Machine Applications | SIPLACE HS50, HS60, D1, D2 and D4 |
| Axis / Function | Machine X-axis drive |
| Other SIPLACE X-Axis Motor Families |
00310954 — S15/F3/G2; 00318553 — S20/F4/F5; 00334153 — S23-S27, F5HM, CS and CF |
| Assembly Level | Complete X-axis motor unit |
| Matching Points | Complete P/N and suffix, machine model, X-axis installation position, motor label, connector and cable configuration |
Common versions are normally kept in stock, and confirmed stock orders can usually be arranged for shipment within 24–48 hours. Urgent line-repair requirements can be prioritized where applicable.
For matching and quotation, send the complete motor label, SIPLACE machine model, installation photos, connector details, alarm message or fault video, and required quantity. We can first help narrow the likely fault area and verify that 00333167 matches the installed machine before issuing a formal quotation.
A specification confirmation sheet and OEM-reference comparison can be provided for internal purchasing approval. Remote technical support, after-sales support and warranty are available according to the confirmed part and order terms. Exchange-repair support can also be checked for eligible motor units.
Other ASM motor and motion-control parts can be reviewed in the SMT Motor range.