For a CP20P requirement, P/N 03091157 is only the starting point. CP20P heads are used as high-speed placement heads on X-Series equipment such as the SIPLACE X4i S, but different suffix versions can exist within the same head family.
If repeated pickup faults, vacuum-related alarms or an increasing number of placement rejects are traced toward one head, the CP20P becomes one of the assemblies to inspect alongside nozzles, feeders, vision and process settings. A matched spare head gives maintenance teams another recovery option while the production head is being checked or repaired.
Versions such as 03091157-03 and -04 are found in actual X4i S configurations, so the complete label matters more than the base number alone. Camera configuration should also be included in the head requirement rather than assumed after the head arrives.
03091157 CP20P Head Specifications
| Head Model | SIPLACE CP20P |
|---|---|
| Base Part Number | 03091157 |
| Known Revisions | -03, -04 |
| Assembly Level | Complete placement head |
| Head Principle | Collect & Place |
| Known Application Example | SIPLACE X4i S |
| Component Camera Example | P/N 03003426-05 on verified X4i S configurations |
CP20P sourcing is primarily a revision-and-assembly matching task. Provide the complete 03091157 label, machine model, gantry position and camera requirement rather than relying on the base P/N alone.
For lines where CP20P is a production-critical head, keeping a correctly matched spare can provide another recovery path while the installed head is under inspection or repair. Warranty and replacement-support terms can be confirmed against the specific head supplied.