When an E by SIPLACE line is configured around CP14, the head's job is clear: fast placement of small components. That role separates it from the CP12, CP12/PP and TH options used to extend the same machine platform into larger or more flexible component ranges.
If small-component mis-picks or placement rejects begin to rise, the CP14 head is one of the assemblies worth checking after nozzles, feeders, component setup and process conditions have been reviewed. A matched CP14 spare also gives maintenance teams a direct recovery option without changing the machine to another E-platform head type.
The buying decision should stay tied to the CP14 itself. The wider component capability of the complete E platform does not belong to this head.
03109887 CP14 Head Specifications
| Head Model | E by SIPLACE CP14 |
|---|---|
| Part Number Family | 03109887-xx |
| Assembly Level | Complete placement head |
| Machine Platform | E by SIPLACE |
| Nozzle Positions | 14 |
| Component Range | 01005 to 6 × 6 mm |
| Maximum Component Height | 4 mm |
| E-Platform Speed Reference | 45,300 CPH |
For a CP14-equipped E by SIPLACE machine, keep the requirement tied to the dedicated small-component head rather than the wider capability of the complete platform. Provide the full 03109887 label, machine model and camera configuration for matching.
For lines where CP14 carries a large share of the small-component placement workload, preparing a correctly matched spare head can reduce sourcing delays when the installed unit is removed for maintenance and helps preserve the established E-platform head configuration.