P/N 00141290 is the 8mm SIPLACE X feeder configuration with Splice Sensor. The sensor is used to recognize splice points in joined carrier tape, so splice detection is part of this feeder's actual configuration rather than a generic precision upgrade.
If the line reports a splice-related problem or the feeder no longer recognizes the splice point as expected, first inspect the tape joint, splice rivet, tape alignment and feeder setup. A pickup fault by itself does not prove that the Splice Sensor or complete feeder has failed.
This feeder should be chosen when the installed setup specifically requires the X-generation Splice Sensor configuration. The corresponding standard 8mm X feeder is P/N 00141270; X Smart and Xi Smart sensor feeders belong to different P/N families.
00141290 8mm Splice Sensor Feeder Specifications
| Base Part Number | 00141290 |
|---|---|
| Part Type | SIPLACE X feeder with Splice Sensor |
| Assembly Level | Complete feeder |
| Tape Width | 8 mm |
| Feeder Generation | X Feeder |
| Sensor Configuration | With Splice Sensor |
| Sensor Role | Recognition of the splice point / splice rivet in joined carrier tape |
| Non-Sensor Sibling | 00141270 |
For quotation, send the complete 00141290 P/N and suffix, machine model, 8mm tape pitch, confirmation that Splice Sensor functionality is required, feeder photos and any splice-related alarm or operating symptom available. This helps distinguish a sensor-related requirement from a general 8mm feeding problem.
If the line already relies on the X-generation Splice Sensor configuration, keeping the same feeder type preserves the established tape-splice process. The replacement decision should follow the actual sensor requirement rather than assuming that any 8mm feeder can take its place.