P/N 00141270 is the single-lane 8mm feeder in the SIPLACE X feeder family. It uses a motorized tape drive, incorporates cover-foil storage and carries a unique feeder ID, while the required feeder pitch can be transferred from the programming system or set at the feeder control panel.
For an established X-Series setup using 00141270, replacement should preserve the same X-Feeder configuration unless another feeder generation has been specifically approved for that machine and production setup.
For feed or pickup problems, first check reel loading, carrier-tape path, cover foil and programmed pitch. If the problem continues to follow the same feeder after those conditions are corrected, the feeder becomes the stronger repair or replacement candidate. P/N 00141290 is the corresponding X-generation version with Splice Sensor, while later 8mm SmartFeeder families use different P/Ns.
00141270 8mm X Feeder Specifications
| Base Part Number | 00141270 |
|---|---|
| Known Revisions | -03, -04, -05, -06 |
| Feeder Format | 1 × 8 mm component tape |
| Feeder Generation | SIPLACE X Feeder |
| Tape Drive | Motorized |
| Cover Foil | Integrated cover-foil storage |
| Feeder Identification | Unique feeder ID |
| Splice Sensor Sibling | 00141290 |
For an exact match, provide the complete 00141270 suffix, machine model, 8mm tape pitch, Splice Sensor requirement and photos of the current feeder. This is especially important on lines where X, X Smart and Xi Smart feeders may all be present.
If the line still depends on the X feeder generation, a correctly matched maintenance spare can provide a faster recovery option when an operating feeder is removed for repair. Matching the existing generation first is more useful than selecting another 8mm feeder from width alone.