P/N 00141490 is encountered as an 8mm SIPLACE SmartFeeder with Splice Sensor, with known label forms including 00141490-01 and 00141490S01. Because SIPLACE uses several different 8mm sensor-feeder P/N families, this feeder should be matched from the complete label rather than identified from 8mm tape width alone.
The practical selection rule is simple: use 00141490 when the installed feeder label or approved machine configuration specifically calls for this P/N. Do not automatically substitute another 8mm sensor reference such as the 00141290 sensor feeder, and do not infer that the 00141480 Xi SmartFeeder is equivalent just because the tape width is also 8mm.
If the complaint is related to splice detection, first inspect the tape joint or splice rivet, tape path, pitch setup and feeder recognition before replacing the complete unit. SIPLACE splice-sensor service testing uses a tape sample with a splice rivet, so a general pickup fault by itself is not enough to prove a Splice Sensor failure.
00141490 8mm SmartFeeder Specifications
| Base Part Number | 00141490 |
|---|---|
| Known Revisions | -01 / S01 |
| Part Type | SIPLACE 8mm SmartFeeder with Splice Sensor |
| Assembly Level | Complete feeder |
| Tape Width | 8 mm |
| Sensor Configuration | Splice Sensor |
For quotation, provide the complete 00141490 label and suffix, exact machine model, current feeder position, 8mm tape pitch, confirmation that Splice Sensor functionality is required, and clear photos of both the feeder and its identification label.
For this P/N, correct identification has more value than selecting a feeder from a general 8mm family list. If the operating line depends on 00141490, keeping a verified matching spare can reduce sourcing uncertainty when that feeder is removed for service.