P/N 00141377 is the 72mm X Smart feeder configuration without the Splice Sensor used on P/N 00141397. For a production line already running 00141377, maintaining the same feeder configuration is normally more important than choosing another 72mm feeder simply because the tape width matches.
With 72mm carrier tape, the tape path, reel loading, pitch setting and pickup position all matter to stable material presentation. If repeated feeding or pickup-position problems follow one feeder, first check the reel installation, tape and cover-tape path, and machine-side setup before concluding that the complete feeder should be replaced.
The purchasing decision is therefore configuration-led: use 00141377 when it matches the feeder already installed and Splice Sensor functionality is not part of that requirement. If the existing line uses splice detection, compare the 00141397 72mm X Smart Splice Sensor feeder instead.
00141377 72mm Feeder Specifications
| Part Number | 00141377 |
|---|---|
| Feeder Type | SIPLACE X Smart tape feeder |
| Assembly Level | Complete feeder |
| Tape Width | 72 mm |
| Feeder Family | SIPLACE X Smart |
| Splice Sensor | No; the corresponding Splice Sensor configuration is P/N 00141397 |
Start from the feeder already approved on the line. For quotation, provide the complete P/N and suffix, machine model, tape pitch, component height or pocket requirement, whether Splice Sensor functionality is required, and clear photos of the installed unit.
For critical 72mm material positions, a correctly matched spare 00141377 can provide another recovery option when the production feeder is removed for inspection or repair. The main purchasing decision is to preserve the required X Smart configuration rather than choose another feeder from tape width alone.