P/N 00141269 is a SIPLACE X feeder built around a 2×8mm feeding format. That dual 8mm identity is the reason this feeder deserves its own purchasing decision: it should not be replaced with a standard single 8mm feeder simply because both handle 8mm carrier tape.
If a feeding problem appears on only one of the two tape positions, first identify which side is affected and check that reel, tape path, cover tape and setup independently. If the same side continues to fail after the material setup is ruled out, the feeder module becomes the next repair point. This avoids replacing the complete 2×8 feeder for a problem caused by one tape setup.
For a line already configured around the 2×8 format, keeping the same feeder arrangement preserves that material-supply setup during replacement or planned spare preparation. The 00141270 single 8mm X feeder is a different feeder format and should not be treated as a direct equivalent from width alone.
00141269 2x8mm X Feeder Specifications
| Base Part Number | 00141269 |
|---|---|
| Part Type | SIPLACE X tape feeder |
| Assembly Level | Complete feeder |
| Feeder Format | 2 × 8 mm |
| Feeder Generation | X Feeder |
| Splice Sensor Sibling | 00141289 |
| X Smart 2×8 Sibling | 00141369 |
| Xi Smart 2×8 Sibling | 00141479 |
For matching, provide the complete 00141269 label and suffix, machine model, confirmation that the 2×8mm format is required, tape pitch and application for both sides, the affected channel if a fault is present, and clear feeder photos.
For production setups that depend on the dual 8mm format, a correctly matched spare preserves both feeder positions in the existing material layout. A single-lane 8mm feeder should not be treated as an equivalent replacement simply because the carrier-tape width is the same.