P/N 00141392 is the 16mm SIPLACE SmartFeeder X configuration with Splice Sensor. It belongs to the same 16mm X Smart feeder family as the 00141372 standard 16mm feeder, but the sensor-equipped configuration is part of the feeder identity and should be preserved when the production setup requires it.
The 16mm configuration occupies two feeder locations, supports transport increments from 4 to 20mm in 4mm steps, and allows tape height up to 25mm. These values matter when checking whether the feeder matches the actual carrier-tape format and the available feeder positions on the SIPLACE X-Series setup.
If a splice-related feeding problem appears, first check the tape joint, reel loading, tape and cover-tape path, pitch settings and machine-side setup. Only after those conditions are ruled out should the Splice Sensor or complete feeder become the primary repair target. This prevents a material or setup problem from turning into an unnecessary complete-feeder replacement.
00141392 16mm X SmartFeeder Specifications
| Base Part Number | 00141392 |
|---|---|
| Known Revisions | -03, -04, -05 |
| Part Type | SIPLACE SmartFeeder 16mm X with Splice Sensor |
| Tape Width | 16 mm |
| Feeder Locations | 2 |
| Transport Increment | 4–20 mm in 4 mm steps |
| Maximum Tape Height | 25 mm |
| Sensor Configuration | Splice Sensor |
For quotation, provide the complete 00141392 suffix, exact machine model, 16mm tape pitch, tape height or pocket requirement, confirmation that Splice Sensor functionality is required, and clear photos of the feeder label and installed unit.
When a production line depends on a specific 16mm sensor-feeder configuration, keeping a correctly matched spare can shorten the time needed to restore that material position while another feeder is under inspection or repair. Other feeder widths and configurations can be compared in the ASM SIPLACE feeder range.