ASM SIPLACE 00141399 is the 104mm X SmartFeeder configuration with splice sensor. Documented references include 00141399-01, while the neighboring 104mm X feeder 00141379 is listed as the corresponding configuration without splice sensor.
This sensor configuration is the central selection point for the page. SIPLACE service documentation confirms that the splice sensor is used to recognize a splice rivet in the tape. That is a specific function and should not be replaced by broader claims such as generic intelligent sensing or automatic correction.
00141399 SmartFeeder Specifications
| Part Number | 00141399 |
| Documented Revision | 00141399-01 |
| Product Type | SIPLACE SmartFeeder 104mm X |
| Sensor Configuration | With splice sensor |
| Sensor Function | Recognition of a tape splice rivet |
| Related Version | 00141379 — 104mm X feeder without splice sensor |
| Feeder Family | SIPLACE X SmartFeeder |
| Key Matching Point | Confirm whether the installed 104mm feeder requires the splice-sensor configuration |
A splice-related problem and a normal tape-transport problem should be separated during diagnosis. If the splice sensor does not recognize the test splice, the sensor installation and its electrical connection become relevant checks. If ordinary tape transport is unstable, the mechanical feed path and drive should be investigated separately rather than assigning every feeder symptom to the sensor.
This distinction is also useful during procurement. A request for 104mm X SmartFeeder alone does not identify whether 00141379 or 00141399 is required, the presence of the splice-sensor configuration is the decisive difference between these two references.
Other X and S feeder products can be reviewed in the ASM SIPLACE feeder range. For an urgent 00141399 requirement, send the complete feeder label, machine information and fault details so the sensor configuration can be confirmed before dispatch.