ASM SIPLACE 03081381 is a distributor assembly used in the CPP placement-head system. It is commonly supplied as a CPP distributor or CPP vacuum distributor, but the purchasing decision should be based on the exact part label and installed position rather than on the generic vacuum-distributor description alone.
The main repair decision is to separate the distributor from the other pneumatic and vacuum components inside the CPP head. A pickup or vacuum-related fault does not automatically mean the 03081381 distributor has failed. The generator, pneumatic interfaces and related control components belong to different repair levels, so replacing the distributor before the fault has been narrowed to this assembly can leave the original problem unresolved and extend both diagnostic time and spare-parts cost.
Head-family matching is equally important. The 03081381 belongs to the CPP system, while distributor assemblies used on other head families carry different part numbers and configurations. Similar names do not indicate interchangeability, so the original assembly label, pneumatic interfaces and mounting position should be checked before ordering.
ASM SIPLACE 03081381 Distributor Specifications
| Part Number | 03081381; confirm the complete suffix from the installed assembly |
|---|---|
| Part Type | CPP Distributor / Vacuum Distributor |
| Head Application | ASM SIPLACE CPP placement-head system |
| Common Selection Risk | Confusion with distributor or pneumatic assemblies used on other SIPLACE head families, or with the CPP vacuum generator |
| Assembly Level | Head-level pneumatic distributor assembly |
| Revision Note | Multiple 03081381 suffixes are documented; do not assume interchangeability without confirming the complete label and configuration |
| Repair Decision | Confirm that the pneumatic or vacuum fault has been narrowed to the distributor before replacing other CPP head components |
| Core Matching Point | Complete part label, CPP head type, installed position, pneumatic interfaces and existing assembly configuration |
For the larger head context, see the ASM SIPLACE CPP Placement Head 03053528. During fault isolation, keep the distributor, vacuum generator and electronic control components tied to their own P/Ns instead of treating every CPP vacuum-related part as the same replacement category.
If the fault boundary is still unclear, send the complete 03081381 label, photos of the installed assembly and pneumatic interfaces, CPP head information, and the available vacuum or pickup-related fault details. Our technical team can help narrow whether the repair should remain at distributor level or move to another part of the CPP pneumatic system.
03081381 is normally supported from spare-parts stock, with confirmed orders typically dispatched within 24–48 hours. Urgent CPP head-repair requirements can be prioritized when needed.
After the distributor identity and head configuration are confirmed, a specification confirmation sheet can be prepared for engineering and purchasing approval. Send the complete part label, CPP head model and required quantity for verification and formal quotation.