ASM SIPLACE 03066107-xx is a Type 20xx nozzle magazine used in the CPP / MultiStar nozzle-changer system. SIPLACE documentation identifies this magazine with 20 garages for 20xx-series nozzles and specifies it for the MultiStar head system, making the head family and nozzle series the first matching points for replacement.
A wrong magazine is more than a part-number mismatch. SIPLACE nozzle-changer documentation warns that mixed head and magazine configurations can create a head-crash risk, while missing or incorrectly seated magazines can stop the placement machine through the safety circuit. For this reason, a C&P20 magazine such as 03016831S05 should not be substituted for 03066107 simply because both parts are described as nozzle magazines.
Magazine condition also matters when diagnosing recurring nozzle-changer problems. The locking plate must operate freely and the magazine must seat correctly in the changer; SIPLACE documentation specifically notes that contamination or dropped components can cause the locking plate to jam. If the fault is localized to the magazine rather than the basic nozzle-changer assembly, replacing the magazine keeps the repair at the smaller assembly level.
SIPLACE 03066107 Nozzle Magazine Specifications
| Part Number | 03066107-xx; confirm the complete suffix from the installed magazine |
|---|---|
| Part Type | Type 20xx nozzle magazine |
| Head Application | SIPLACE CPP / MultiStar |
| Common Selection Risk | Mixing CPP / MultiStar magazines with magazines intended for another placement-head family |
| Nozzle Configuration | 20 garages for 20xx-series nozzles |
| Related Magazine | 03016831S05 – complete nozzle magazine for C&P20; not a direct head-family substitute |
| Core Matching Point | Full P/N suffix, CPP / MultiStar head type, 20xx nozzle requirement and installed magazine configuration |
If your existing unit is for a C&P20 head rather than CPP / MultiStar, compare it with the 03016831S05 C&P20 nozzle magazine before ordering.
When a nozzle-changer fault has been narrowed to the magazine, send the complete label together with the head type and photos of the seating, locking-plate and retention areas. We can check whether the repair should remain at 03066107 magazine level before a larger changer assembly is considered. Confirmed 03066107 requirements can normally be dispatched from stock within 24–48 hours, with urgent changer-repair orders prioritized when necessary; a specification confirmation sheet is also available when purchasing needs a documented matching record.