The SDS series servo amplifier handles Z and DP axis drive control in SIPLACE equipment, while X/Y axes and the star axis are covered by the TBS series. This means replacement selection for the 00353445 must match the axis type exactly — different axes run different current settings, and the amplifier is calibrated to the maximum motor current of the drive it connects to. The axis-specific nature is strict. For configurations such as C&P20 and CPP, this model can be retained and continues in use.
The SDS series can handle up to 60 VDC or 120 VDC depending on the input. The amplifier can be reset via the servo release switch on the axis controller board. When a fault occurs, voltage can be measured at analog output MP7 to help diagnose: -1 V indicates overvoltage, -2 V overcurrent, -3 V overtemperature, and -4 V nominal current exceeded.
SIPLACE 00353445 Servo Amplifier
| Part Number | 00353445 |
|---|---|
| Amplifier Model | SDS120/2.5S1 |
| Part Type | Servo amplifier / drive board |
| Documented Application | Star-axis servo position with SIPLACE HF Collect & Place head |
| Platform Context | SIPLACE HF series |
| Documented Revisions | 00353445-03 and 00353445-04; direct interchangeability has not been confirmed, so match the complete installed label |
| Related Axis Amplifiers | Separate amplifier part numbers are used for X, Y, Z and D / DP axis functions |
| Key Matching Point | Complete P/N, revision, machine model, C&P or Twin Head configuration, and installed servo position |