ASM SIPLACE 00315977-01 is a 1.60 m Expando protection hose supplied as a mechanical protective sleeve for SIPLACE equipment. It is used where cables, hoses or similar routed components require an additional protective covering against contact and movement inside the machine.
Service documentation identifies 00315977-01 as a 1.60 m Expando protective sleeve. For replacement, the important checks are the complete part number, the installed sleeve length and the position in which the part is fitted on the machine. It should be sourced as a protective mechanical sleeve rather than by belt width, tooth pitch, drive speed or other transmission specifications.
00315977 Protection Hose Specifications
| Part Number | 00315977-01 |
| Part Type | Expando protection hose / protective sleeve |
| Documented Description | Expando protective sleeve, 1.60 m |
| Documented Length | 1.60 m |
| Function | Mechanical protection for routed machine components |
| Service Level | Individual protective sleeve |
| Matching Point | Confirm complete P/N, installed routing and required sleeve length |
Inspection and Replacement
Before replacement, inspect the installed sleeve for abrasion, tearing, compression or damage caused by repeated machine movement. The surrounding cables or hoses should also be checked to confirm that the wear is limited to the protective covering and has not extended to the components inside it.
Routing is also important during installation. A replacement sleeve should follow the original path without unnecessary tension, sharp bending or interference with moving machine assemblies. The documented 1.60 m length should be confirmed against the installed part before cutting or fitting.
Because 00315977-01 is a protective sleeve, it should not be selected using belt dimensions, drive speed or transmission specifications. The complete installed marking and physical routing requirement provide the more relevant purchasing references.
For replacement confirmation, provide the full 00315977 marking, photos of the installed sleeve and its routing position, and the machine model when available. Other machine-side mechanical and protective components can be found under ASM SIPLACE spare parts.